Home » Window and door systems » AC-77HI SYSTEM
AC-77HI SYSTEM
Rectangular connections of the sections are obtained by cutting the profiles at an angle of 45˚ and inserting 2 corners into the profile chambers, which can be pinned or crimped. Transverse connections are made using aluminum connectors, which must be pinned. A characteristic feature of the system is its close connection with other window and door systems from Morad, including: AC-62, AZ-45 and AF-50. Adopting this design assumption allowed us to obtain and use many compatible elements in these systems, e.g.: common glazing beads, corners, sealing beads, glazing and cover seals, common fittings and accessories. One of the effects of unification is the almost identical external and internal appearance of the manufactured products.
Flush window sashes in Morad systems
To meet the needs of architects and investors, we have designed new window sashes in which the clip is flush with the sash surface. The new design of the window sash profile will enable the use of fillings with a maximum thickness of 58 mm. This will allow the use of glass with a lower thermal conductivity coefficient, and thus obtain better thermal insulation coefficients of the entire window. Aligning the clip with the sash also makes it easier to install internal blinds.
Single-leaf door: 1504mm x 2583mm
Double doors: 2885mm x 2583mm
Window: 1583mm x 1887mm
Window: 1485mm x 2585mm
Information for the manufacturer:
Drawings for the architect:
RESISTANCE TO WIND LOAD
WATERPROOF
HEAT TRANSFER COEFFICIENT
MAXIMUM LEAF WEIGHT
The system is intended for external construction requiring particularly high thermal insulation parameters. It is possible to make windows and display cabinets, sliding, folding and automatic doors, as well as bent structures. High thermal insulation of the profiles is ensured by the increased profile depth, which is 85 mm for window sashes and 77 mm for other sections, the multi-chamber structure of thermal breaks, which also ensures greater stiffness of the profile, and the multi-chamber structure of two-component gaskets made of EPDM. The profiles are pressed from the EN AW-6060 alloy according to PN-EN 573-3:2009. Dimensional and shape tolerances comply with the PN-EN 12020-2:2001 standard.